Control Flow
The ability to run some code depending on whether a condition is true and to run some code repeatedly while a condition is true are basic building blocks in most programming languages. The most common constructs that let you control the flow of execution of Cairo code are if expressions and loops.
if Expressions
An if expression allows you to branch your code depending on conditions. You provide a condition and then state, “If this condition is met, run this block of code. If the condition is not met, do not run this block of code.”
Create a new project called branches in your cairo_projects directory to
explore the if expression. In the src/lib.cairo file, input the following:
#[executable]
fn main() {
let number = 3;
if number == 5 {
println!("condition was true and number = {}", number);
} else {
println!("condition was false and number = {}", number);
}
}
All if expressions start with the keyword if, followed by a condition. In
this case, the condition checks whether or not the variable number has a value
equal to 5. We place the block of code to execute if the condition is true
immediately after the condition inside curly brackets.
Optionally, we can also include an else expression, which we chose to do here,
to give the program an alternative block of code to execute should the condition
evaluate to false. If you don’t provide an else expression and the condition
is false, the program will just skip the if block and move on to the next
bit of code.
Try running this code; you should see the following output:
$ scarb execute
Compiling no_listing_24_if v0.1.0 (listings/ch02-common-programming-concepts/no_listing_27_if/Scarb.toml)
Finished `dev` profile target(s) in 1 second
Executing no_listing_24_if
condition was false and number = 3
Let’s try changing the value of number to a value that makes the condition
true to see what happens:
let number = 5;
$ scarb execute
condition was true and number = 5
Run completed successfully, returning []
It’s also worth noting that the condition in this code must be a bool. If the
condition isn’t a bool, we’ll get an error. For example, try running the
following code:
#[executable]
fn main() {
let number = 3;
if number {
println!("number was three");
}
}
The if condition evaluates to a value of 3 this time, and Cairo throws an
error:
$ scarb build
Compiling no_listing_28_bis_if_not_bool v0.1.0 (listings/ch02-common-programming-concepts/no_listing_28_bis_if_not_bool/Scarb.toml)
error: Mismatched types. The type `core::bool` cannot be created from a numeric literal.
--> listings/ch02-common-programming-concepts/no_listing_28_bis_if_not_bool/src/lib.cairo:5:18
let number = 3;
^
error: could not compile `no_listing_28_bis_if_not_bool` due to previous error
The error indicates that Cairo inferred the type of number to be a bool
based on its later use as a condition of the if statement. It tries to create
a bool from the value 3, but Cairo doesn't support instantiating a bool
from a numeric literal anyway - you can only use true or false to create a
bool. Unlike languages such as Ruby and JavaScript, Cairo will not
automatically try to convert non-Boolean types to a Boolean. If we want the if
code block to run only when a number is not equal to 0, for example, we can
change the if expression to the following:
#[executable]
fn main() {
let number = 3;
if number != 0 {
println!("number was something other than zero");
}
}
Running this code will print number was something other than zero.
Handling Multiple Conditions with else if
You can use multiple conditions by combining if and else in an else if
expression. For example:
#[executable]
fn main() {
let number = 3;
if number == 12 {
println!("number is 12");
} else if number == 3 {
println!("number is 3");
} else if number - 2 == 1 {
println!("number minus 2 is 1");
} else {
println!("number not found");
}
}
This program has four possible paths it can take. After running it, you should see the following output:
$ scarb execute
Compiling no_listing_25_else_if v0.1.0 (listings/ch02-common-programming-concepts/no_listing_30_else_if/Scarb.toml)
Finished `dev` profile target(s) in 1 second
Executing no_listing_25_else_if
number is 3
When this program executes, it checks each if expression in turn and executes
the first body for which the condition evaluates to true. Note that even
though number - 2 == 1 is true, we don’t see the output
number minus 2 is 1 nor do we see the number not found text from the else
block. That’s because Cairo only executes the block for the first true
condition, and once it finds one, it doesn’t even check the rest. Using too many
else if expressions can clutter your code, so if you have more than one, you
might want to refactor your code. Chapter
6 describes a powerful Cairo
branching construct called match for these cases.
Using if in a let Statement
Because if is an expression, we can use it on the right side of a let
statement to assign the outcome to a variable.
#[executable]
fn main() {
let condition = true;
let number = if condition {
5
} else {
6
};
if number == 5 {
println!("condition was true and number is {}", number);
}
}
$ scarb execute
Compiling no_listing_26_if_let v0.1.0 (listings/ch02-common-programming-concepts/no_listing_31_if_let/Scarb.toml)
Finished `dev` profile target(s) in 1 second
Executing no_listing_26_if_let
condition was true and number is 5
The number variable will be bound to a value based on the outcome of the if
expression, which will be 5 here.
Repetition with Loops
It’s often useful to execute a block of code more than once. For this task, Cairo provides a simple loop syntax, which will run through the code inside the loop body to the end and then start immediately back at the beginning. To experiment with loops, let’s create a new project called loops.
Cairo has three kinds of loops: loop, while, and for. Let’s try each one.
Repeating Code with loop
The loop keyword tells Cairo to execute a block of code over and over again
forever or until you explicitly tell it to stop.
As an example, change the src/lib.cairo file in your loops directory to look like this:
#[executable]
fn main() {
loop {
println!("again!");
}
}
When we run this program, we’ll see again! printed over and over continuously
until either the program runs out of gas or we stop the program manually. Most
terminals support the keyboard shortcut ctrl-c to interrupt a program that is
stuck in a continual loop. Give it a try:
$ scarb execute --available-gas=20000000
Compiling loops v0.1.0 (file:///projects/loops)
Finished release target(s) in 0 seconds
Running loops
again!
again!
again!
^Cagain!
The symbol ^C represents where you pressed ctrl-c. You may or may not see the
word again! printed after the ^C, depending on where the code was in the loop
when it received the interrupt signal.
Note: Cairo prevents us from running program with infinite loops by including a gas meter. The gas meter is a mechanism that limits the amount of computation that can be done in a program. By setting a value to the
--available-gasflag, we can set the maximum amount of gas available to the program. Gas is a unit of measurement that expresses the computation cost of an instruction. When the gas meter runs out, the program will stop. In the previous case, we set the gas limit high enough for the program to run for quite some time.
It is particularly important in the context of smart contracts deployed on Starknet, as it prevents from running infinite loops on the network. If you're writing a program that needs to run a loop, you will need to execute it with the
--available-gasflag set to a value that is large enough to run the program.
Now, try running the same program again, but this time with the
--available-gas flag set to 200000 instead of 2000000000000. You will see
the program only prints again! 3 times before it stops, as it ran out of gas
to keep executing the loop.
Fortunately, Cairo also provides a way to break out of a loop using code. You
can place the break keyword within the loop to tell the program when to stop
executing the loop.
#[executable]
fn main() {
let mut i: usize = 0;
loop {
if i > 10 {
break;
}
println!("i = {}", i);
i += 1;
}
}
The continue keyword tells the program to go to the next iteration of the loop
and to skip the rest of the code in this iteration. Let's add a continue
statement to our loop to skip the println! statement when i is equal to 5.
#[executable]
fn main() {
let mut i: usize = 0;
loop {
if i > 10 {
break;
}
if i == 5 {
i += 1;
continue;
}
println!("i = {}", i);
i += 1;
}
}
Executing this program will not print the value of i when it is equal to 5.
Returning Values from Loops
One of the uses of a loop is to retry an operation you know might fail, such
as checking whether an operation has succeeded. You might also need to pass the
result of that operation out of the loop to the rest of your code. To do this,
you can add the value you want returned after the break expression you use to
stop the loop; that value will be returned out of the loop so you can use it, as
shown here:
#[executable]
fn main() {
let mut counter = 0;
let result = loop {
if counter == 10 {
break counter * 2;
}
counter += 1;
};
println!("The result is {}", result);
}
Before the loop, we declare a variable named counter and initialize it to 0.
Then we declare a variable named result to hold the value returned from the
loop. On every iteration of the loop, we check whether the counter is equal to
10, and then add 1 to the counter variable. When the condition is met, we
use the break keyword with the value counter * 2. After the loop, we use a
semicolon to end the statement that assigns the value to result. Finally, we
print the value in result, which in this case is 20.
Conditional Loops with while
A program will often need to evaluate a condition within a loop. While the
condition is true, the loop runs. When the condition ceases to be true, the
program calls break, stopping the loop. It’s possible to implement behavior
like this using a combination of loop, if, else, and break; you could
try that now in a program, if you’d like. However, this pattern is so common
that Cairo has a built-in language construct for it, called a while loop.
In Listing 2-2, we use while to loop the program three times,
counting down each time after printing the value of number, and then, after
the loop, print a message and exit.
#[executable]
fn main() {
let mut number = 3;
while number != 0 {
println!("{number}!");
number -= 1;
}
println!("LIFTOFF!!!");
}
while loop to run code while a condition holds true.
This construct eliminates a lot of nesting that would be necessary if you used
loop, if, else, and break, and it’s clearer. While a condition evaluates
to true, the code runs; otherwise, it exits the loop.
Looping Through a Collection with for
You can also use the while construct to loop over the elements of a collection,
such as an array. For example, the loop in Listing 2-3 prints
each element in the array a.
#[executable]
fn main() {
let a = [10, 20, 30, 40, 50].span();
let mut index = 0;
while index < 5 {
println!("the value is: {}", a[index]);
index += 1;
}
}
through each element of a collection using a while loop
Here, the code counts up through the elements in the array. It starts at index
0, and then loops until it reaches the final index in the array (that is, when
index < 5 is no longer true). Running this code will print every element in
the array:
$ scarb execute
Compiling no_listing_45_iter_loop_while v0.1.0 (listings/ch02-common-programming-concepts/no_listing_45_iter_loop_while/Scarb.toml)
Finished `dev` profile target(s) in 1 second
Executing no_listing_45_iter_loop_while
the value is: 10
the value is: 20
the value is: 30
the value is: 40
the value is: 50
All five array values appear in the terminal, as expected. Even though index
will reach a value of 5 at some point, the loop stops executing before trying
to fetch a sixth value from the array.
However, this approach is error prone; we could cause the program to panic if
the index value or test condition is incorrect. For example, if you changed the
definition of the a array to have four elements but forgot to update the
condition to while index < 4, the code would panic. It’s also slow, because
the compiler adds runtime code to perform the conditional check of whether the
index is within the bounds of the array on every iteration through the loop.
As a more concise alternative, you can use a for loop and execute some code
for each item in a collection. A for loop looks like the code in Listing
2-4.
#[executable]
fn main() {
let a = [10, 20, 30, 40, 50].span();
for element in a {
println!("the value is: {element}");
}
}
through each element of a collection using a for loop
When we run this code, we’ll see the same output as in Listing 2-3. More importantly, we’ve now increased the safety of the code and eliminated the chance of bugs that might result from going beyond the end of the array or not going far enough and missing some items.
Using the for loop, you wouldn’t need to remember to change any other code if
you changed the number of values in the array, as you would with the method used
in Listing 2-3.
The safety and conciseness of for loops make them the most commonly used loop
construct in Cairo. Even in situations in which you want to run some code a
certain number of times, as in the countdown example that used a while loop in
Listing 2-2. Another way to run code a certain number of times
would be to use a Range, provided by the core library, which generates all
numbers in sequence starting from one number and ending before another number.
Here’s how you can use a Range to count from 1 to 3:
#[executable]
fn main() {
for number in 1..4_u8 {
println!("{number}!");
}
println!("Go!!!");
}
This code is a bit nicer, isn’t it?
Equivalence Between Loops and Recursive Functions
Loops and recursive functions are two common ways to repeat a block of code
multiple times. The loop keyword is used to create an infinite loop that can
be broken by using the break keyword.
#[executable]
fn main() -> felt252 {
let mut x: felt252 = 0;
loop {
if x == 2 {
break;
} else {
x += 1;
}
}
x
}
Loops can be transformed into recursive functions by calling the function within
itself. Here is an example of a recursive function that mimics the behavior of
the loop example above.
#[executable]
fn main() -> felt252 {
recursive_function(0)
}
fn recursive_function(mut x: felt252) -> felt252 {
if x == 2 {
x
} else {
recursive_function(x + 1)
}
}
In both cases, the code block will run indefinitely until the condition x == 2
is met, at which point the value of x will be displayed.
In Cairo, loops and recursions are not only conceptually equivalent: they are
also compiled down to similar low-level representations. To understand this, we
can compile both examples to Sierra, and analyze the Sierra Code generated by
the Cairo compiler for both examples. Add the following in your Scarb.toml
file:
[lib]
sierra-text = true
Then, run scarb build to compile both examples. You will find that the Sierra
code generated for both examples is extremely similar, as the loop is compiled
to a recursive function in the Sierra statements.
Note: For our example, our findings came from understanding the statements section in Sierra that shows the execution traces of the two programs. If you are curious to learn more about Sierra, check out Exploring Sierra.
Summary
You made it! This was a sizable chapter: you learned about variables, data
types, functions, comments, if expressions and loops! To practice with the
concepts discussed in this chapter, try building programs to do the following:
- Generate the n-th Fibonacci number.
- Compute the factorial of a number n.
Now, we’ll review the common collection types in Cairo in the next chapter.